Rear jack mounts and passenger floor
Filed under Adam
Finished up the rear jack mounts. They run through the chassis rail (if you can call it that on a s14) and are braced to the cage. I decided to weld another layer of sheetmetal to the underside for strength, as this is the area that will take the main force from the jack lifting the car. Next i moved onto the passenger side seat rail. On this side of the floor there is a big hump where the stock cat converter usually lives. I decided to cut this out so i could mount the seat at the same height/position as the drivers side. Now to fill the hole in with new sheetmetal. The tunnel tapered in a few different spots so i decided it would be easiest to fill the hole in with 4 separate pieces of metal. Now thats pretty much all done i can start on the seat mount.