With the 8.5j starsharks and Billspeer knuckles up front the wheels hit the brake line at full lock. On the wagon i fixed this problem by slotting the hole that the line comes through. I wanted to do a tidier job with the sedan so this is what i came up with. Heres the stock brakeline in the wheel well... First i cut the bracket off. Drilled a new hole and bent the line a little to suit. I then welded a new tab onto the bracket that i cut off. And bolted it back in its new position. Just need to get 2 rubber grommets to block up the old holes then its all done.